Trim Molding - 316L Stainless Random Swirl Finish | Stainless Supply
HAVE YOUR OWN DRAWING?

If you have a drawing that you would like us to see, then upload it here.

Select "Yes" then click the "Browse" button to find your drawing on your computer.

Once you've browsed for your drawing, click the "Submit" button to upload it to our servers.

Make sure the file is no larger than 5MB and should be one of these file formats: .jpg, .gif, .png, .pdf, .dwg, .dwf, .dxf, .sldrw, .igs, .step, .stp, skp, .dae.

Trim Molding - 316L Stainless Random Swirl Finish

SSHBP - #8 Mirror

SSHBP - BA (Bright Annealed)

HPS - #8 Mirror

HPS - BA (Bright Annealed)

DS - #8 Mirror

DS - BA (Bright Annealed)

SG4 - #8 Mirror

SG4 - BA (Bright Annealed)

SG4 - #8 Mirror Beveled

SG4B - BA (Bright Annealed) Beveled

SG4TT - Two Tone

SBW - #8 Mirror

SBW - BA (Bright Annealed)

D3 - #8 Mirror

D3 - BA (Bright Annealed)

D3B - #8 Mirror Beveled

D3B - BA (Bright Annealed) Beveled

D4 - #8 Mirror

D4 - BA (Bright Annealed)

D4B - #8 Mirror Beveled

D4B - BA (Bright Annealed) Beveled

D6 - #8 Mirror

D6 - BA (Bright Annealed)

D6B - #8 Mirror Beveled

D6B - BA (Bright Annealed) Beveled

D6TT - Two Tone

D6TT - Two Tone

D12 - #8 Mirror

D12 - BA (Bright Annealed)

D12B - #8 Mirror Beveled

D12B - BA (Bright Annealed) Beveled

DT63 - #8 Mirror

DT63 - BA (Bright Annealed)

DT63B - #8 Mirror Beveled

DT63B - BA (Bright Annealed) Beveled

DT84 - #8 Mirror

DT84 - BA (Bright Annealed)

DT84B - #8 Mirror Beveled

DT84B - BA (Bright Annealed) Beveled

DT84TT - Two Tone

BW1 - #8 Mirror

BW1 - BA (Bright Annealed)

BW2 - #8 Mirror

BW2 - BA (Bright Annealed)

BW3 - #8 Mirror

BW3 - BA (Bright Annealed)

Trim Molding - 316L Stainless Random Swirl Finish

Your Account  | 
Login
Stainless Supply

Experts Available
(877) 484-0088
Stainless Supply

(877) 484-0088

INSTALL VIDEOS

Trim Molding - 316L Stainless Random Swirl Finish
Jump To Cost Calculator
Description
Product Description

These 316L stainless steel Random Swirl finish trim moldings are made from the same 24 gauge 316L stainless steel that we sell in sheet form. They are used to attach sheets as wall coverings and backsplashes, along with providing aesthetic covering for seams between sheets and around corners. Our trim moldings have deep pockets to allow for variance in the existing wall and also have extra wide nailing strips to make installation more convenient.

Edge
The edge trim molding is made from our 24 gauge 316L stainless steel random swirl sheet stock. Edge trim molding is used to make a finished edge. The pocket is 1", and you do not need to subtract any for this specific trim molding.

Divide
The divide trim molding is made from our 24 gauge 316L stainless steel random swirl sheet stock. Divide trim molding is used to join two adjacent sheets on the same wall. The pocket for each side is 7/16", and subtracting 1/8" from each sheet will accommodate for this trim.

Inside Corner
The inside corner trim molding is made from our 24 gauge 316L stainless steel random swirl sheet stock. Inside corner trim molding is used to join two sheets at 90 degrees on an inside corner. The pocket for each side is 3/4", and subtracting 7/8" from the sheet size will accommodate for this trim.

Outside Corner
The outside corner trim molding is made from our 24 gauge 316L stainless steel random swirl sheet stock. Outside corner trim molding is used to join two sheets at 90 degrees on an outside corner. The pocket for each side is 3/4", and subtracting 3/16" from the sheet size will accommodate for this trim.

Note:
-When ordering material, you will need to subtract from the sheet size to account for the trim (see drawings).
-Trim molding can be attached to the wall with screws, nails, or adhesive prior to installing the sheets.

Cost Calculator

STEP 2: Standard Or Cut To Size

Step 2: Standard Or Cut To Size
Cut To Your Size
Standard Sizes


Feet Inches Fractions
Click Here for Wholesale Pricing Information
Qty:  

QUANTITY DISCOUNTS

QUANTITY DISCOUNT PRICE/PIECE
11 - 30 10% Discount
31+ 20% Discount

STEP 4: Fabrication Options

All cuts are guaranteed to be +.125" -0" (+1/8" -0")
Please note that cuts less than a whole inch will be priced at the next full inch price.





Quick Request


Need something different?
Can't find what you're looking for?

Click here to submit your request.
Privacy  |  Terms  |  Shipping  |  Returns  |  Contact
©2024 Stainless Supply. All Rights Reserved.